The vacuum packaging machine is suitable for all kinds of plastic composite film bags or aluminum foil composite film bags. Various solids, powders, and liquids are vacuum packed. So what preparations should be made or what should be paid attention to during the use of the vacuum packaging machine?
Preparation before use:
1. The vacuum packaging machine is placed steadily, check whether the lid is closed smoothly, and whether it automatically jumps up after releasing it.
2. Equipped with a power supply that meets the requirements of the model.
3. Check whether the position of the oil surface of the vacuum pump of the vacuum packaging machine is correct. If not, adjust it (see the vacuum pump manual for details).
4. Ground the vacuum packaging machine well.
5. Turn on the power, turn on the power switch, close the cover, and check whether the vacuum pump is operating normally.
Adjustment before use
1. Select the degree of vacuum
The pumping time of the vacuum packaging machine is digitally displayed and continuously adjustable. The pumping time of the small vacuum packaging machine is adjustable from 0 to 30 seconds in a digital rotary type. Adjust the length of the pumping time to achieve the required vacuum.
2. Select the heating temperature
Select the required heating temperature according to the material of the packaging bag, and adjust the heating temperature knob to the corresponding position.
3. Adjust the heating time
Heating time, digital display, continuously adjustable, according to the packaging materials and heating temperature, adjust the heating time knob to select the appropriate heating time.
4. According to the needs, select the silicone word for the sealing silicone rubber strip, and set the sealing date and other characters.
Matters needing attention when using
1. Turn on the power switch.
2. Open the packaging bag bead, put the packaging bag containing the packaged items into the working room, and place the seal on the silicone rubber strip flatly. Do not overlap the bag. Turn over the packaging bag bead to press the opening of the packaging bag. Good.
3. (or press the edge of the upper cover) press down the upper working room and close the cover, the machine will automatically complete the vacuum packaging process and automatically open the cover according to the program. Some equipment is equipped with an emergency stop switch.
4. Open the vacuum cover and take out the packaging bag to complete a working cycle.
5. Turn off the power switch and pull out the power plug when you stop working.
